DescriptionSteering Head Bearing upper/lower SIP PREMIUMfor Vespa 125 VNA/VNB3 ->061000/150 VBA/VBB1T ->82819/VGLB1T ->041664for lower head tube: Ø 43,5mmfor top head tube: Ø 35.0mm9-partswith rolling element cagePRODUCT DESCRIPTIONThis kit converts the older Vespa steering bearings (individual ball type) to the later type (caged type) with new races and tracks and bearings, a must if you cannot sort out the loose/tight/notchy original steering bearings in these older models.Steering head bearings on the basis of caged ball-bearings as found on all Vespa PX and PK models, now also suitable for all vintage Vespa models.The steering head bearings are an essential component for rider safety and a stable suspension. If a scooter does not display directional stability or has vague handling, we recommend that their function and serviceability be checked. It is a relatively simple job and can be done in no time. First pull the scooter onto its centre-stand and move the steering assembly from left to right a couple of times to check for any tight points or resistance to free-movement. Then, moving to the front of the scooter, take hold of the exposed lower end of the steering column and attempt to move it forwards and backwards. If you notice any free movement or clicking sounds then this is also an indication that the bearings are damaged or worn and require immediate replacement. A steering column that has, over time, become loose can rarely be fixed by simply having the bearings tightened so we recommend the fitting of a new set of bearings every time.Easy mounting, even for vintage models.Available for all vintage Vespa models.All necessary components are included in the delivery.All Vespa models produced since the sixties share the same steering head bearing size, earlier models were produced with a variety of shapes and diameters. The older models were factory-fitted with a type of steering head bearing that required each individual ball-bearing to be positioned carefully onto each bearing cup during mounting, provisionally held there by a film of grease. This involved procedure requires skill, experience and a lot of patience to be satisfactorily completed and there can also be problems finding new bearings of this type due to a lack of demand. Their replacements are then often of bad quality and/or extraordinarily expensive.SIP replacement Steering Head Bearings for all vintage Vespa modelsTo facilitate a more efficient repair we decided to have Vespa PX/PK style caged bearings produced in various sizes to also suit all earlier produced Vespa models. This means the new caged bearings are identical for both the upper and lower ends of the steering column fixings. The bearing cups, attached to the frame and steering column, have been individually designed to suit each specific model. This involved the redevelopment and production of new parts and tools used in their manufacture. A case in point is represented by the dust shrouds we now have available for the Vespa V1-V33 models. We had to start from scratch in order to develop and produce a new pressing tool for these ultra-rare parts!Mounting tip: The PIAGGIO workshop manual recommendations for mounting these bearings are as follows: Tighten the upper steering head bearing to 60-70Nm and then loosen the nut by about a quarter turn. The locking nut can then be tightened to 50-60Nm to finish the job.The delivery includesLocking nut.Tanged washer.Upper cup/upper bearing.Upper bearing race.Lower cup/upper bearing.Upper cup/lower bearingLower bearing race.Lower cup/lower bearing.Dust shroud.Conclusion: The most simple method of updating vintage Vespa models to a modern standard of steering head bearings!The SIP steering column bearing kit for the Vespa VNA/VNB/VBA/VBB models replaces the original loose ball-bearing version. This finally brings these models into line with the later produced models. If you have ever attempted to replace the originally included type then you will appreciate the simplicity this necessary update provides. The surface is treated with nitrogen for an increased durability and protection against corrosion compared to the original items.Model / manufacturerccTypeEngineYear of constructionAdditionMOTOVESPA 125 N125VT2T AC1959MOTOVESPA 125 S125VTT2T AC1959MOTOVESPA 150 GS15004C2T AC1967MOTOVESPA 150 S150VTT2T AC1962MOTOVESPA 150 S150V13502C2T AC1964MOTOVESPA 150 Sprint15004C2T AC1966MOTOVESPA 160 / GT16009C2T AC'68VESPA 125 (T1/125) (D)125VNA1-22T AC'57-'59VESPA 125 (T2/125) (D)125VNB1-62T AC'59-'65-> VNB3T 061000VESPA 150 (T4/150) (D)150VGLA-B2T AC'59-'65-> VGLB1T 041664VESPA 150150VBA1T2T AC'58-'60VESPA 150150VBB1-22T AC'60-'67-> VBB1T 82819VESPA 150 Sprint150VLB1T2T AC'65-'74
